Mapping Gateway in VOS3000 SoftSwitch – Part – 2

VOS3000

This post is about Mapping Prefixes, Period control and Advanced options in VOS3000 Softswitch. Links of other tutorial posts are at the below of the post.

Mapping Prefixes:

Prefixes of the caller number:

  • Allow: Prefixes of the caller numbers allowed to pass through (left blank to allow all numbers)
  • Disallow: Prefixes of the caller numbers disallowed to pass through
  • Only one of the “Allow” and “Disallow” options can be chosen
VOS3000

Prefixes of the called number:

  • Allow: Prefixes of the called numbers allowed to pass through
  • Disallow: Prefixes of the called numbers disallowed to pass through

Rewrite Rules for the caller number: Rewrite Rules for the caller number when called out through this gateway..
Rewrite Rules for the called number: Rewrite Rules for the called number when called out through this gateway.

Timing – Period Control:

Timed Rewrite Rules:

  • Starting time: Time when the substitution rule comes into effect
  • Expiration time: Time when the substitution rule expires

Mode:

  • The called: The substitution rule applies to the called number
  • The caller: The substitution rule applies to the caller number
  • Substitution rule: The content of the rule

Period Call Restrictions:

  • Starting time: Time when the rule comes into effect
  • Expiration time: Time when the rule expires
VOS3000

Operations:

  • Disallow: Disallow operations for the matched prefixes
  • Allow: Allow operations for the matched prefixes

Mode:

  • The caller: Matches the prefixes of the caller numbers
  • The called: Matches the prefixes of the called numbers
  • Prefix: The prefix of the number. Multiple prefixes can be specified, separated by commas.

Timed number of channels:

  • Starting time: Time when the rule comes into effect
  • Expiration time: Time when the rule expires
  • Number of channels: The maximum number of channels allowed for this period of time

Advanced Settings:

H323:

  • Error message replacement: Specify the error message sent to the mapping gateway when the call cannot be established.
  • Q931 Progress Indicator: See the standard reference for H323.

SIP:

  • Response address: See the descriptions in the post about routing gateways management.
  • Request address: See the descriptions in the post about routing gateways management.
  • G729 negotiation: See the descriptions in the post about routing gateways management.
  • Error message replacement: Specify the error message sent to the mapping gateway when the call cannot be established.
  • Remote back-ringing method.
  • Authentication method.
VOS3000

DTMF:

  • DTMF reception: Specifies the way by which DTMF signals are received. The “All” option is recommended, which asks the system to accept all kinds of DTMFs. Once a certain kind of DTMF is received, this channel will accept the same kind of DTMFs only, thus effectively avoiding duplicate receptions.
  • Payload: The payload value in RTP, for the DTMF of the RFC2833 mode.
  • DTMF (H323) sending: It is set to “Auto” by default, indicating that the system would determine the best way to send DTMFs based on the receiver’s capacity. If the receiver provides no capacity set, the system will send according to the default mode. The RFC2833 mode can only be specified for media proxy.
  • DTMF (SIP) sending: It is set to “Auto” by default. The details are the same as those of “DTMF (H323) sending” described above.

IP address: See the descriptions in “Supplement settings”
Account number: The number of the billing account for this mapping gateway.
Account name: The name of the billing account for this mapping gateway.
Password: The password used for dynamic registration, which is also the password used for Web query.
Memo: Comments on this gateway.

Thanks a lot.

Leave a Reply

Your email address will not be published. Required fields are marked *